Synthesis and photocatalytic performance of PVA/TiO2/graphene‐MWCNT nanocomposites for dye removal

TiO₂/graphene‐MWCNT nanocomposite was prepared using solvothermal reaction for the effective distribution of TiO₂ nanoparticles on carbonaceous materials. TiO₂/graphene‐MWCNT nanocomposite was immobilized in poly(vinyl alcohol) (PVA) matrix for a convenient recovery after wastewater purification. MWCNT was incorporated in a nanocomposite not only to prevent the restacking of graphene but also to increase the electron transfer from TiO₂. The detailed characterization of the nanocomposite was performed using SEM, EDX, XRD, XPS, and FTIR. The photocatalytic performance of PVA/TiO₂/graphene‐MWCNT nanocomposite was investigated by UV spectroscopy on the basis of degradation of organic pollutants. PVA/TiO₂/graphene‐MWCNT nanocomposite showed improved photocatalytic decomposition of more than 70% of residual dye left in case of using PVA/TiO₂/graphene nanocomposite due to the improved electron transfer and the higher adsorption of organic pollutants. PVA/TiO₂/graphene‐MWCNT nanocomposite was suitable as a promising material for the recyclable photocatalytic wastewater purification system. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40715.     

Electrical properties and the role of inhomogeneities at the polyvinyl alcohol/n‐inp schottky barrier interface

In this work, we have investigated the electrical properties of Au/n‐InP contacts with a thin layer of polyvinyl alcohol (PVA) as an interlayer. The current–voltage (I–V) and capacitance–voltage (C–V) measurements are carried out in the temperature range of 175–425 K. The Au/PVA/n‐InP Schottky structure show nonideal behaviors and indicates the presence of a nonuniform distribution of interface states. The temperature dependent interface states densities (N_SS), ideality factor and barrier height are obtained. An abnormal decrease in zero‐bias barrier height (BH) and increase in the ideality factor ( ) with decreasing temperature have been explained on the basis of the thermionic emission theory with Gaussian distribution (GD) of the BHs due to the BH inhomogeneities. The experimental I–V characteristics of Au/PVA/n‐InP Schottky diode has revealed the existence of a double GD with mean BH values of ( ) of 1.246 and 0.899 eV and standard deviation ( ) of 0.176 and 0.137 V, respectively. Consequently, the modified conventional activation energy versus plot gives and Richardson constants ( ) and the values are 1.17 and 0.71 eV and 9.9 and 6.9 A/cm² K², respectively, without using the temperature coefficient of the BH. The effective Richardson constant value of 9.9 A/cm² K² is very close to the theoretical value of 9.4 A/cm² K² for n‐InP. The discrepancy between Schottky barrier heights estimated from I–V and C–V measurements is also discussed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39773.     

Enhanced gas separation properties of metal organic frameworks/polyetherimide mixed matrix membranes

Metal organic frameworks (MOFs) are supposed to be ideal additives for mixed matrix membranes (MMMs). In this article one kind of MOFs, Cu₃(BTC)₂, is synthesized, then directly incorporated into a model polymer (Ultem®1000) using N,N‐dimethylacetamide as solvent. Cu₃(BTC)₂ particles are uniformly dispersed and there are no interfacial defects in the prepared MMMs when Cu₃(BTC)₂ loading is not more than 35 wt %, seen in SEM images. Pure gas permeation tests show that gas permeability increases obviously with Cu₃(BTC)₂ loading increase, while ideal selectivities of CO₂/N₂ and CO₂/CH₄ are almost unchanged. For MMM with the best separation property, CO₂ permeability increases about 2.6 times and CO₂/N₂ selectivity remains almost unchanged. Results about gas diffusivity and solubility indicate that gas diffusivity and solubility make contribution to gas permeability increase at the same time but in different ways. Gas permeation properties of MMMs are well predicted by Maxwell or Bruggeman model. © 2014 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40719.     

Effect of diisocyanate on pyridine containing shape memory polyurethanes based on N,N‐bis(2‐hydroxylethyl)isonicotinamide

This article demonstrates a comparative investigation about the effect of diisocyanate on pyridine containing shape memory polyurethanes (Py‐SMPUs), which are synthesized with N,N‐bis(2‐hydroxylethyl)isonicotinamide (BINA) and four different diisocyanates: 1,6‐hexanediisocyante (HDI), isophorone diisocyanate (IPDI), methylene diphenyl diisocyanate (MDI), and tolylene diisocyanate (TDI). Results show that all BINA–SMPU systems have amorphous reversible phase. Comparatively, the MDI–BINA and TDI–BINA systems show higher T_g; and the HDI–BINA and IPDI–BINA systems show better thermal stability. In addition, the HDI–BINA and the IPDI–BINA systems exhibit good thermal‐induced shape memory effect and good moisture‐sensitive shape memory effect due to their better moisture absorption properties. Particularly, the HDI–BINA system has better response speed and better shape recovery. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40721.     

Fluidity improvement of semiaromatic polyamides: Modification with oligomers

Poly(decamethylene terephthalamide) PA10T with different relative viscosities (RV) were successfully produced by the reaction of 1,10‐decanediamine and terephthalic acid through molecular weight regulator benzoic acid (BA). RV was shown to be decreased linearly with increasing BA concentrations and detailed structures of PA10Ts were characterized by ¹³C‐NMR. Fluidity of PA10T with varying molecular weight was tested and low RV PA10Ts were used as modifiers to improve fluidity behaviors of high RV PA10Ts, meanwhile mechanical properties were maintained. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40058.     

Effect of SiO2 on rheology,morphology, thermal,and mechanical properties of high thermal stable epoxy foam

A series of highly thermostable epoxy foams with diglycidyl ether of bisphenol‐A and bisphenol‐S epoxy resin (DGEBA/DGEBS), 4,4′‐diaminodiphenyl sulfone (DDS) as curing agent have been successfully prepared through a two‐step process. Dynamic and steady shear rheological measurements of the DGEBA/DGEBS/DDS reacting mixture are performed. The results indicate all samples present an extremely rapid increase in viscosities after a critical time. The gel time measured by the crossover of tan δ is independent of frequency. The influence of SiO₂ content on morphology, thermal, and mechanical properties of epoxy foams has also been investigated. Due to the heterogeneous nucleation of SiO₂, the pore morphology with a bimodal size distribution is observed when the content of SiO₂ is above 5 wt %. Dynamic mechanical analysis (DMA) reveals that pure epoxy foam possesses a high glass transition temperature (206°C). The maximum of specific compressive strength can be up to 0.0253 MPa m³ kg^?1 at around 1.0 wt % SiO₂. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40068.     

Development of a disposable electrode modified with carbonized,graphene‐loaded nanofiber for the detection of dopamine in human serum

A one‐step electrode surface modification is proposed in which a disposable, screen‐printed carbon electrode is functionalized with carbonized, electrospun polyacrylonitrile (PAN)‐loaded graphene (G) nanoparticles to form a composite, CPAN5G‐4x. The electrochemical behavior of the CPAN5G‐4x electrode was examined by cyclic voltammetry and electrochemical impedance spectroscopy. Scanning electron microscopy and X‐ray diffraction were used to characterize the surface morphology and physical properties of the carbonized composite nanofibers before and after modification. The modified electrode was found to be effective for the detection of dopamine (DA) using square‐wave voltammetry (SWV) in the presence of interfering substances such as ascorbic acid and uric acid. With the addition of sodium dodecyl sulfate (SDS) to an optimized solution of phosphate‐buffered saline (PBS) at a pH of 2, the fabricated electrode exhibited enhanced electrocatalytic activity toward the oxidation of DA relative to PBS without SDS at a pH of 7.4. The SWV current displayed a linear response to DA concentrations ranging from 0.5 to 100 μM, with a limit of detection of 70 nM (S/N = 3) and a sensitivity of 1.4258 μA μM^?1 cm^?2. Finally, the CPAN5G‐4x electrode was used to determine DA levels in human serum. The modified electrode can potentially be harnessed for further electrochemical biosensor applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40858.     

Matched‐dual‐polymer electrochromic lenses,using new cathodically coloring conducting polymers,with exceptional performance and incorporated into automated sunglasses

Reported are syntheses of several new monomer precursors of cathodically coloring conducting polymers (CPs), based on a propylene dioxythiophene skeleton. These are shown to yield CPs—both as homopolymers and as copolymers—that are nearly “perfectly” matched electrochemically and electrochromically with a set of anodically coloring poly(aromatic amines), for use in dual‐polymer electrochromic lenses. Resulting dual‐polymer electrochromic lenses display very high light/dark contrast (typically up to 70/7% or 50/0.5% Transmission (integrated over visible spectrum, vs. air reference), Haze < 2%, very high cyclability (> 10 K cycles), multiyear shelf life, appealing transparent to dark‐blue‐black transition, and excellent optical memory. Dramatic lowering of switching time, from 8 to < 1 s, is demonstrated using unique applied‐potential algorithm resident on inexpensive Microcontroller chip. Working, practical dual‐polymer electrochromic spectacles are demonstrated with electrochromic lenses retrofitted to spectacles meeting ANSI Z87.1, GL‐PD 10–12 (U.S. military) specifications. These incorporate photosensor, rechargeable Li battery, Microcontroller, allow for automated operation. Ab‐initio‐design spectacles, also conforming to above specifications, are also demonstrated, with components seamlessly hidden within frame. To the best of our knowledge, the electrochromic lenses and sunglasses reported herein represent the best visible‐region electrochromic performance for dual‐polymer CP electrochromic systems to date and the first practical implementation in working sunglasses. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41043.